PRUSASLICER PROFILES CHANGELOG

2.3.5

18. 9. 2025
  • Decreased support angle threshold (MK4S, CORE One – 0.4n SPEED/BALANCED profiles).
  • Organic supports. Increased default value for “Branch diameter with double walls”.
  • Updated filament profile for “Extrudr DuraPro ASA”.
  • Updated filament profile for Fiberlogy PP (increased bed temperature on preference for specialized PP sheet).
  • Fixed compatible printer condition for “Devil Design PETG”.
  • “Prusament PETG V0” marked as UL certified for Original Prusa XL.

2.3.4

11. 9. 2025
  • Updated firmware version notification (6.2.6)

2.3.3 (PrusaSlicer 2.9.3)

11. 9. 2025
  • Added values for “travel short distance acceleration” (new parameter).
  • Added parameters for new cooling slowdown logic.
  • Added new “BALANCED” profiles (CORE One HF0.4/HF0.5/HF0.6).
  • Increased overhang speed for 75% overlap (CORE One HF0.4, SPEED profiles).
  • Increased print speeds (CORE One 0.25mm nozzle, 0.12mm SPEED and 0.15mm SPEED).
  • Increased print speeds (CORE One 0.3mm nozzle, 0.16mm SPEED and 0.20mm SPEED).
  • Decreased default minimal layer time for PETG (CORE One 0.4mm nozzle).
  • Increased default infill/perimeter overlap (0.4 nozzle).

2.2.20

11. 9. 2025
  • Updated firmware version notification (6.2.6)

2.2.19

1. 8. 2025
  • Optimized perimeter speeds in “Structural” profiles for quieter printing (CORE One).
  • Updated pressure advance values for Buddy3D PETG.