PRUSASLICER PROFILES CHANGELOG

• Decreased min. print speed for PLA (INDX).
• Updated time estimate for tool change duration (INDX).
• Decreased acceleration for inner perimeters (INDX – fine/detail/balanced).
• Decreased speed for 0% overlap overhangs (INDX).
• Updated cooling settings for Prusament PVB (C1/MK4/XL).

• Added filament profile for Prusament ASA (INDX).
• Added filament profile for Prusament PC Blend (INDX).

• Updated firmware version notification for INDX (please update to FW6.6.2).
• Updated toolchange script and start gcode (INDX).
• Updated Prusament PLA and PETG profiles (INDX).
• Updated Generic PLA, PLA Silk and PETG profiles (INDX).

• Added filament profiles for Prusament PC Blend Carbon Fiber, Prusament Woodfill, Prusament rPLA (INDX).
• Reduced speed for support material in Balanced profile (INDX).
• Updated retraction length for Prusament PLA (INDX).
• Updated firmware version notification (INDX 6.6.1).

• Added profiles for Prusa CORE One INDX
• Updated FW version notification

• Added filament profile for Prusament PLA High Speed.

• Updated maximum width of a segmented region for XL and MMU (slicing with multimaterial painting) to save print time and material.

• Updated filament profile for Buddy3D ABS (reduced extrusion multiplier).

• Updated FW version notification (6.4.1 for XL).
• Updated filament profiles for Prusament TPU 95A, Filament PM PETG, Prusa PETG.
• Updated “Balanced” profiles (slower speed over bridges).

• Updated firmware version notification (6.5.3 for MK4/C1/MK3.9/MK3.5 family)
• Decreased minimal layer time for Prusament PC Blend.

• Updated default configuration for Prusa Signature Oak.

• Added profiles for Prusa Signature Oak.
• Added profiles for CORE One L MMU3.
• Updated MMU parameters for MK3.9/MK4/C1 family printers (start g-code and filament unload speeds).
• Reduced max. volumetric speed for Fillamentum Flexfill 98A (MK4/C1/XL).

• Updated PA values for Buddy3D ABS, Buddy3D ASA.
• Fixed fan speeds for Colorfabb PETG (XL, MK4).
• ColorFabb nGen-CF10 marked as abrasive filament.
• Fixed filament type for 3D-Fuel PET-CF.

• Removed discontinued 3D-Fuel filaments. Added profiles for Pro PETG, Pro PCTG, PET-CF, Standard PLA+, Tough PLA+

• Added filament profile for Prusament PETG Ultraglow (0.4-0.6mm non-HF nozzles).

• Updated filament profiles for colorFabb bronzeFill, copperFill, XT-CF20, HT.
• Added filament profiles for colorFabb allPHA, ASA, GlowFill, nGen-CF10, PETG, PLA Economy, PLA High Speed PRO, rPLA, TPU 85A, TPU 95A, Vibers, PA Neat, PA-CF (MK4, XL, CORE family).

• Updated FW version notification (XL 6.2.6).
• Updated filament profiles for ColorFabb XT, HT, XT20-CF, PLA-PHA.

• Updated spool weight for Prusament filaments (193g->278g).
• Updated filament profile for Extrudr PETG and Extruder XPETG Matte.
• Updated support material settings for 0.25mm nozzle (increased contact Z distance).

• Updated filament profile for Numakers PLA+ (increased temperature for bigger nozzles).
• Updated “SOLUBLE” profiles (default mode is now set to “supports everywhere”).

• Updated FW version notification (6.4.0).
• Updated start g-code sequence (Prusa XL).
• Increased raft first layer density.

• Added BALANCED profiles for non-HF 0.4mm nozzle (C1/C1L).
• Updated FW version notification (C1L).
• Support generation now defaults to “For support enforcers only” mode, eliminating the need to manually enable supports after using paint-on Supports or support enforcers.

• Updated filament profile for Prusament TPU 95A.

• Added profiles for CORE One L.
• Added filament profiles for Numakers filaments.

• MMU3 – added support for 0.6mm nozzle (MK4 family, CORE One)
• Updated start g-code (CORE One).
• Added filament profiles for Numakers PLA+, Numakers PLA Silk, Numakers PETG-HS.

• Prusament PC Space Grade is now also available for Prusa XL and MK4.
• Updated cooling settings for Forward-AM Ultrafuse PET-CF15 (CORE One, MK4S).

• Added filament profile for Prusament PC Space Grade (currently available for MK4S, CORE One).

• Decreased support angle threshold (MK4S, CORE One – 0.4n SPEED/BALANCED profiles).
• Organic supports. Increased default value for “Branch diameter with double walls”.
• Updated filament profile for “Extrudr DuraPro ASA”.
• Updated filament profile for Fiberlogy PP (increased bed temperature on preference for specialized PP sheet).
• Fixed compatible printer condition for “Devil Design PETG”.
• “Prusament PETG V0” marked as UL certified for Original Prusa XL.

• Updated firmware version notification (6.2.6)

• Added values for “travel short distance acceleration” (new parameter).
• Added parameters for new cooling slowdown logic.
• Added new “BALANCED” profiles (CORE One HF0.4/HF0.5/HF0.6).
• Increased overhang speed for 75% overlap (CORE One HF0.4, SPEED profiles).
• Increased print speeds (CORE One 0.25mm nozzle, 0.12mm SPEED and 0.15mm SPEED).
• Increased print speeds (CORE One 0.3mm nozzle, 0.16mm SPEED and 0.20mm SPEED).
• Decreased default minimal layer time for PETG (CORE One 0.4mm nozzle).
• Increased default infill/perimeter overlap (0.4 nozzle).

• Updated firmware version notification (6.2.6)

• Optimized perimeter speeds in “Structural” profiles for quieter printing (CORE One).
• Updated pressure advance values for Buddy3D PETG.

• Updated FW version notification (CORE One 6.3.4).
• Added filament profile for Sunlu PETG.
• Updated Jessie PETG profile (decreased HF0.4 vol limit, increased 0.6mm nozzle temperature).
• Updated compatible printer condition for Filatech PA.
• Updated machine limits (MK4 family, increased max retract acceleration).

• Added filament profile for Prusament PP Glass Fiber.
• Added filament profile for Sunlu PLA.
• Added filament profile for Devil Design PLA Silk.

• Added filament profile for 3DJAKE ecoPLA.
• Increased support material extrusion width (0.4mm nozzle).
• Increased BVOH purge multiplier (MMU3).
• Updated Devil Design PETG filament profile. Increased nozzle temperature and updated PA values (MK4 family/XL/COREONE).
• Updated Filatech PETG filament profile (increased multiplier).

• Updated Prusament PETG, Generic PETG and Buddy3D PETG profile (HF nozzle). Increased nozzle temperature for better reliability, layer adhesion and crossing infill quality.
• Updated arachne parameters for 0.25mm SPEED and 0.28mm DRAFT profiles (HF nozzle).
• Updated pressure advance values for Jessie PLA.
• Updated retraction settings for flexible materials (MK4/XL/CORE family).
• Added Prusament PLA Blend, Generic PLA Silk profiles for Prusa MINI (IS).
• Added Generic PLA Silk profile for MK3.5.

• Added profiles for Tectonic-3D filaments (AURA PLA, AURA PETG, AURA ASA+, KRATIR PA11 CF, KRATIR PA6.66 CF, KRATIR PP CF).

• Added filament profile for Prusament TPU 95A.

• Updated collision model for sequential prints (CORE One MMU3).

• Added profiles for CORE One MMU3
• Updated FW version notification (6.3.3 for CORE One).

• Updated FW version notification (6.2.5 for XL).
• Updated filament profile for Hatchbox PLA (decreased vol. limit, increased temperature for 0.6mm nozzle).

• Removed 440×240 QOI thumbnail. This resolution is not used since FW 5.1.0 from 11/2023. (MK4/MK3.9/MK3.5/XL/COREONE family).
• PNG thumbnail resolution changed from 640×480 to 380×285 (MK4/MK3.9/MK3.5/XL/COREONE/MINI family).

• Updated firmware version notification.
• Increased non-print travel speed for 0.6n/0.8n print profiles (MINI).

• firmware update notification (6.3.1 for CORE One).
• Updated pressure advance values for Prusament PC Blend (MINI).
• Increased support material extrusion width for 0.25mm SPEED and 0.28mm DRAFT.

• Updated end print parking position in accordance with FW6.3.1 (CORE One).

• Updated PETG cooling thresholds (CORE One).
• Updated FW version notification (6.2.3 for MK4, MK4S, MK3.9, MK3.9S, MK3.5, MK3.5S).
• Filament vendor BASF renamed to Forward AM.
• Updated pressure advance values for Spectrum PCTG.

• Updated filament profile for “Prusament PP Carbon Fiber” (CORE One).
• Updated filament profiles for “Spectrum PCTG”.

• Updated firmware version notification (6.2.2).
• Updated values for 1st layer solid infill speed and speed over bridges.
• Added filament profile for Overture High Speed TPU.
• Added filament profile for Polymaker PolyDissolve S1 (XL).
• Added filament profile for Alzament Basic PLA.
• Added BREAKAWAY print profiles (XL).
• Increased PETG nominal chamber temperature (C1).
• Extruder clearance parameters moved to printer settings.

• Updated firmware version notification (6.2.2)

• Added filament profiles for Sunlu PLA+ 2.0; Elegoo Rapid PLA+; Overture PETG; Polymaker PolyTerra PLA.

• Added filament profiles for Elegoo PLA and Elegoo Rapid PETG.
• Updated 1st layer temperature for some PETG filaments.
• Updated PETG volumetric speed limits (HF).
• Updated PA values (COREONE non-HF nozzle).

• Added MMU3 support for selected ASA, ABS, BVOH and PC Blend filaments (MK3.9/MK4 family printers).
• Slightly updated maximum volumetric speed limits for some flexible filaments.

• Updated minimal chamber temperatures (CORE One).

• Added printer profiles for Prusa CORE One.
• Updated compatible printer condition for Prusament PETG 40% Magnetite (XL HF0.6/0.8).

• Updated organic support parameters for alternative nozzle diameters (mainly tip diameter).
• Reduced default number of top support interface layers.

• Added profiles for IGUS filaments.
• Updated end-gcode parking script condition.

• Fixed pressure advance/linear advance condition for Prusament PP Carbon Fiber (MK3/MK3.5 family printers).

• Added filament profiles for Prusament PETG Magnetite 40%.
• Updated FW version notification (3.14.1 for MK2.5/MK3 family printers).
• Re-enabled “SOLUBLE” print profiles (MK4/MK4S MMU3)
• Updated max. volumetric speeds for some specific filament profiles (XL HF0.4/HF0.5)

• Added Buddy3D filaments.

• Added filament profile for “Prusament PP Carbon Fiber”.
• Added filament profile for “Cookiecad PLA”.
• Decreased extrusion multiplier for Colorfabb steelFill.
• Updated compatible printer condition for some filaments (more filaments available for HF nozzles).

• Updated FW version notification (6.1.3)
• Updated start g-code (Prusa XL).
• Slightly reduced maximum volumetric speed for FiberFlex 40D (MK3.9/MK4).

• Updated new parameters. PrusaSlicer 2.8.1 brings two new parameters: Filaments->Advanced->Abrasive material and Printers->Extruder->High flow nozzle. Both parameters will be used to check whether a sliced g-code is compatible with the given printer (abrasive material requires hardened nozzle). On the firmware side, this feature is supported since 6.2.0-alpha1.
• Updated overhang fan speed overrides (MK4S).

FFF printers

• Fixed an issue in configuration wizard. The “MK4 MMU3 HF0.4” variant could not be enabled without also enabling non-HF 0.4 variant.

FFF printers

• Added profiles for VOXELPLA+ and VOXELPETG+ filaments
• Updated compatible printer condition for specific filaments.

FFF printers

• Added printer profiles for Original Prusa MK4S and MK3.9S.
• Added profiles for high flow nozzles (MK4/MK3.9/XL).
• Printer profile “Original Prusa MK3.5” was renamed to “Original Prusa MK3.5 & MK3.5S”
• Non-IS variants of MK4, MINI and XL printers were moved to the “Legacy profiles” section (bottom part of the list).
• Added “0.20mm STRUCTURAL” profile for 0.3mm nozzle.
• “Filatech FilaFlex” renamed to “Filatech FilaFlexible”.

FFF printers

• Added filament profile for Prusament Woodfill.
• Added filament profile for BASF Ultrafuse TPU-64D (MK4/MK3.9/XL).
• Updated FW version notification (6.0.4).

FFF printers

• Updated FW version notifications
• M74 command was moved from “Before layer change G-code” to “After layer change G-code” (MK4/MK3.9/MK3.5/MINI).

FFF printers

• Updated version number for PrusaSlicer 2.8.0

SLA printers

• Added values for extended SLA layer separation configuration. In previous PrusaSlicer versions the layer separation configuration mostly consisted of selecting a “Material printing profile” from 3 predefined options (Slow / Fast / High viscosity). PrusaSlicer 2.7.5 changes the way how the separation is configured and many new parameters are now accessible in Material Settings -> Material printing profile.

FFF printers

• Updated FW version notification (6.0.1 for MK4/MK3.9/MK3.5/MINI/XL).
• Added ROSA3D filament profiles.
• Increased default infill density to 20% (0.6mm nozzle MK4/MK3.9/MK3.5/XL).
• Updated infill speeds (0.6mm nozzle MK4/MK3.9/MK3.5/XL).
• Updated bridge speeds in selected print profiles (MK4/MK3.9/MK3.5/XL).
• Increased number of top/bottom layers in “0.32mm STRUCTURAL” print profile.
• Reduced solid infill speed for structural profiles (0.4mm nozzle MK4/MK3.9/MK3.5/XL).
• Decreased perimeter speed for “0.10mm FAST DETAIL” profile (MK4/MK3.9/XL).
• Increased temperature 235C->240C for “Generic PETG” and “Prusa PETG” (0.6mm nozzle MK4/MK3.9/MK3.5/XL).
• Increased temperature 240C->245C for “Prusament PETG” (0.6mm nozzle MK4/MK3.9/MK3.5/XL).

FFF printers

• Updated FW version notification
• Decreased max ramping lift for flexible filaments (MK4/MK3.9).
• Reduced minimal fan speed for Prusament PETG, Prusa PETG, Generic PETG.
• Updated filament custom g-code condition for pressure advance value (XL/MK4/MK3.9).

1.13.2

SLA printers

• “Dental” category was renamed to “Medical”.
• Materials added: Prusament Resin Flex Anatomic Red, Prusament Resin Flex Gingiva Mask.
• Materials removed: All legacy/discontinued Prusa materials (vendor “Made for Prusa”).

1.13.1

FFF printers

• Enabled stealth mode support for XL, MINI, MK3.5, MK3.9, MK4.

SLA printers

• Materials added: Prusament Resin Model Transparent Clear

1.13.0

FFF printers

• Added profiles for MK4 MMU3 and MK3.9 MMU3.
• Updated start g-code for XL. The nozzle is cooled down during heat absorbtion phase to prevent oozing.
• Decreased bed temperature for some PETG filaments (XL, MINI).
• Decreased ramping lift max height for PETG filaments (XL/MK4/MK3.9 0.8mm nozzle).
• Increased acceleration value for top solid infill (MK4/XL 0.4n SPEED profiles).

FFF printers

• Updated start g-code for MK3.5 MMU3

VERSION 1.12.2

• Added new print profile “0.05mm DETAIL” for 0.25mm nozzle (IS variants of MK4/MK3.9/MK3.5/XL/MINI).
• Updated pressure advance values in selected filament profiles.
• Updated retraction settings and ramping lift setting for PETG 0.8mm nozzle (MK4/MK3.9/XL).
• Updated FW version notification (3.13.3 for MK2.5/MK3 family printers).
• Default seam position set to “nearest” (MINI IS 0.6mm nozzle).

VERSION 1.12.1

FFF printers

• Updated printer profile for “XLIS 5T 0.3mm nozzle” to fix issues with configuration wizard.
• Decreased maximum bridging distance on the wipe tower (MK3.5 MMU3 0.25mm nozzle).

VERSION 1.12.0 (released with PrusaSlicer 2.7.2)

FFF printers

• Enabled ramping z-hop for MK4 and MK3.9.

FFF printers

• Added profiles for Original Prusa MK3.5 MMU3.
• Added filament profile for Fiberlogy BVOH.
• Slightly decreased perimeter speeds in “SPEED” profiles to increase reliability with legacy and custom filament profiles (MK3.5 0.4 nozzle).
• Updated “SOLUBLE” print profiles (decreased XY spacing).

FFF printers

• Added profiles for Original Prusa MK3.5

FFF printers

• Decreased speed of sparse infill in STRUCTURAL profiles (0.4mm nozzle).
• Decreased max volumetric speed for some PETG filaments for better sparse infill quality and reliability (XL/MK4/3.9/MINI – 0.4mm nozzle).

FFF printers

• Updated FW version notification (5.1.2 for XL/MINI/MK4/MK3.9).

FFF printers

• The default nozzle diameter for Prusa XL changed to 0.4mm.

SLA printers

• Materials added: Prusament Resin Model Ultra Violet.

FFF printers

• Updated cooling thresholds in selected filament profiles (MK4/XL).

FFF printers

• Updated binary g-code settings for PrusaSlicer 2.7.1. Binary g-code is not used by default in PrusaSlicer 2.7.0. See https://github.com/prusa3d/PrusaSlicer/releases for more information about PrusaSlicer 2.7.1 changes regarding b-gcode handling.

FFF printers

• Updated firmware version notification (5.1.0 for XL/MINI/MK4 and MK3.9).
• Updated print profiles for 0.25mm nozzle. Slightly decreased infill speed/acceleration and increased infill/perimeter overlap in some specific print profiles (XLIS/MK4IS/MK3.9).

FFF printers

• Updated printer names and resources for XL/MINI Input Shaper (final firmware 5.1.0 was released).

FFF printers

• Added filament profile for Prusament rPLA.
• Updated start g-code for XL Multi-Tool to avoid issues with Octoprint.

FFF printers

• Enabled toolchange ramming for PLA filaments (XL Multi-Tool).
• Increased default ramming volume for PLA/PETG/PC (XL Multi-Tool).
• Updated support material speed and extrusion width (XL/MK4/MK3.9 0.6 nozzle).
• Added new print profiles for MK4 IS 0.6 nozzle (0.20mm STRUCTURAL and 0.32mm STRUCTURAL).
• Decreased first layer speed for Prusa MINI Input Shaper.

SLA printers

• Materials added: Prusament Resin Model Neutral Beige

FFF printers

• Updated firmware version notification.
• Updated start g-code for Prusa MINI Input Shaper (Alpha).

FFF printers

• Reduced nozzle temperature by 5-10 °C in selected filament profiles. (Prusa XL 0.6mm nozzle).

FFF printers

• Added additional printer checks for Prusa XL Input Shaper (Alpha).

FFF printers

• Added profiles for Prusa XL Input Shaper (Alpha).
• Added new “Filament PM” filament profiles.
• Updated print profiles (acceleration values) for Prusa MINI Input Shaper (Alpha).

FFF printers

• Updated start g-code. Increased MBL temperature for PET filaments for increased reliability (MK4/MK3.9/XL).
• Prusament PETG V0 filament profile is now marked as UL certified for MK4.
• Slightly decreased bed temperature for some PETG filaments.
• Updated end g-code script for XL Multi-Tool. Print bed now moves further down at the end.

FFF printers

• Enabled XL ramming feature for most filament types (all except PLA and flexibles). This feature reduces strings on the prime/wipe tower (Prusa XL Multi-Tool).
• Added new profiles for Prusa MINI Input Shaper (Alpha). Added profiles for additional nozzle diameters.

FFF printers

• Added new print profiles for “Prusa MINI Input Shaper (Alpha)”.
• Slowed down sparse infill speed for “STRUCTURAL” profiles (MK4IS).
• Updated “0.10mm FAST DETAIL” profile. Increased number of perimeters, slightly reduced perimeter acceleration and sparse infill speed (MK4IS).
• Default fill density changed to 15% for most of 0.4mm nozzle profiles.

FFF printers

• FW version notification (5.0.0 final with input shaper for MK4/MK3.9 family printers).
• Added profiles for Original Prusa MK3.9.
• Added profiles for Original Prusa MINI/MINI+ Input Shaper (Alpha).
• Updated output filename format to prevent occasional issues with g-code export (error message in case the export was initiated before the slicing was completely finished).
• Changed wipe tower angle (XL).
• Added additional thumbnail resolution (640×480 for MINI, XL, MK4).
• Updated clearance values for Prusa XL (sequential printing)

FFF printers

• FW version notification (3.13.0 for MK2.5/3 family printers).
• Increased speed in print profile 0.15mm SPEED (MK4 Input Shaper 0.4 nozzle).
• Updated start g-code and before layer-change g-code (removed M593 commands, MK4 Input Shaper).
• Updated MK4IS thumbnail (wizard).
• Slightly reduced maximum volumetric speed setting for Hatchbox PLA and Esun PLA.

FFF printers

• MK4 Input Shaper firmware notification (5.0.0-RC).

FFF printers

Materials added: Added filament profile for Prusament PETG V0. UL certification is valid for Original Prusa i3 MK3S+, 0.4 mm nozzle, 0.2mm layer height.

FFF printers

• Added new profiles for MK4 Input Shaper (print profiles and new supported nozzle diameters).

FFF printers

• Added profiles for MMU3. (MK3S/MK3S+)
• Added pressure advance values for more nozzle diameters. (MK4IS Alpha)
• Increased minimal purge on wipe tower (XL Multi-Tool)

SLA printers

Materials added: Prusament Resin Flex80 White

FFF printers

• Added profiles for Prusa XL Multi-Tool
• Updated pressure advance values (MK4IS Alpha)

SLA printers

Materials added: Prusament Resin BioBased60 Obsidian Black, Prusament Resin BioBased60 Sapphire Blue, Prusament Resin BioBased60 Ivory White

FFF printers

• Updated start g-code for MK4 (modified purge line and nozzle cleaning). The purge line is now printed on a fixed place outside of the print area.

FFF printers

• MK4/XL – Reduced fan speed for some ASA filaments (Prusament ASA, Ultrafuse ASA, Fillamentum ASA) to increase interlayer adhesion.
• MK4/XL – Updated linear advance values for PLA/PETG.

FFF printers

• MK4/XL – Updated start g-code. Pre-print temperature for PA filaments was increased. This temperature is used for nozzle cleaning and mesh bed leveling.

FFF printers

• MK4/XL – Decreased extrusion width for top solid infill to better fill the top surface (XL/MK4).

• General – Updated density value for PC Blend Carbon Fiber (due to changes in the manufacturing process).

FFF printers

• Fixed compatibility condition for MMU1 filament profiles (some filaments were not marked as compatible with MMU1).

FFF printers

• MK4/XL – Updated profiles for flexible filaments (maximum volumetric speed values)
• Updated MK4 start g-code

SLA printers

• Materials added: Prusament Resin Model Solid Grey, Prusament Resin Model Alabaster White, LOCTITE 3D IND475, LOCTITE 3D PRO476, LOCTITE 3D 3843 HDT60

FFF printers

• Added profiles for Original Prusa MK4
• The default top infill pattern changed to the newly released “Monotonic Lines”. It fills the top surface better and allows using smaller infill/perimeter overlap.
• Decreased infill/perimeter overlap values in most print profiles.
• Updated acceleration settings for Prusa MINI.
• Added profiles for Print With Smile filaments.

FFF printers

• Added filament profile for Prusament PETG Carbon Fiber
• Added filament profile for Fiberthree F3 PA-GF30 Pro

FFF printers

• Updated firmware version notification (MK2.5/MK3 family)
• Added filament profile for Kimya PEBA-S

FFF printers

• Enabled g-code thumbnails for MK2.5 family printers

SLA printers

• Materials added: Prusament Resin Tough Classic Red, Prusament Resin Flex80 Transparent Clear, Prusament Resin Flex80 Black, BlueCast X-One (SL1)

SLA printers

• Materials added: Prusament Resin BioBased60 Natural Yellow, Prusament Resin BioBased60 Herbal Green, Prusament Resin Biobased60 Magma Red

FFF printers

• Updated bridging settings in 0.05mm and 0.07mm print profiles (0.4mm nozzle).
• Added filament profiles: ColorFabb VarioShore TPU, NinjaTek NinjaFlex TPU, NinjaTek Cheetah TPU, FormFutura Centaur PP, Fiberlogy PCTG (MINI), Eolas Prints filaments.

FFF printers

• Added Jessie (Printed Solid) filament profiles.
• Renamed filament type “NYLON” to “PA”.
• Reduced max. bridging distance on wipe tower for “0.10mm DETAIL” profile.
• Updated PETG fan settings for Prusa MINI (removed fan ramp up on initial layers).
• Updated addnorth Adura X filament profile.

SLA printers

• SL1S: Materials added: BlueCast X-One

FFF printers

• Added filament profile for Prusament PA11 Carbon Fiber. (currently not available for Prusa MINI)
• Added profiles for multiple 3D-Fuel filaments.
• Updated filament profile for Taulman Bridge and all Fiberthree F3 PA filaments.
• Updated retraction settings for 0.8mm nozzle.

FFF printers

• Decreased extrusion multiplier for Colorfabb Bronzefill and Copperfill.

SLA printers

• SL1S SPEED materials added: BASF Ultracur3D RG 35, BASF Ultracur3D ST 45, BASF Ultracur3D ST 45 M, BASF Ultracur3D ST 80, BASF Ultracur3D ST 80 White, BASF Ultracur3D ST 80 Black, BASF Ultracur3D EL 150, BASF Ultracur3D FL300, Liqcreate Clear Impact, Liqcreate Strong X, Resinworks 3D Green, 3D Jake Blue.

FFF printers

• Updated firmware version notification. (MK2.5/MK3 family printers)
• Added MMU2 profiles for 0.25mm nozzle. (MK2.5/MK3 family printers)
• Enabled g-code thumbnails (MK3 family printers).
• Updated end-gcode script for MK2/MK2.5/MK3 family printers (improved parking sequence).

FFF printers

• Added multiple “Fiberlogy” filament profiles.
• Updated “Extrudr” filament profiles.

FFF printers

• Added multiple BASF Forward AM filament profiles (some of the profiles may be available only for specific printer models or nozzle diameters).

SLA printers

Materials added:

• SL1: PrimaCreator Tough Clear, PrimaCreator Tough Light Grey, PrimaCreator Tough White.

• SL1S: 3DM-ABS, 3DM-DENT, 3DM-HR Green, 3DM-HR Red Wine, 3DM-Vulcan Gold, 3DM-XPRO White, Asiga Denta Model, Asiga PlasGRAY, BlueCast EcoGray, BluCast Phrozen Wax, NextDent Model 2.0 Grey, NextDent Cast Purple, Siraya Tech Tenacious, Siraya Tech Blue Clear V2, Siraya Tech Blu Blue, Siraya Tech Fast Grey, Siraya Tech Fast Black, Siraya Tech Simple Clear, Siraya Tech Sculpt, Harz Labs Model Resin Cherry, Harz Labs Model Resin Black, Harz Labs Basic Resin Red, Resinworks 3D Violet, FunToDo Industrial Blend, FunToDo Snow White, FunToDo Ash Grey, Ameralabs AMD 3 LED, Dragon Resin Metalshine Metal Grey, Dragon Resin Metalshine Dark Brass, Dragon Resin Metalshine Brass, Esun Bio-Photopolymer Resin White, Esun Standard Resin Black, Monocure 3D Black Rapid Resin, Monocure 3D Blue Rapid Resin, Monocure 3D Clear Rapid Resin, Monocure 3D Grey Rapid Resin, Photocentric Hard Grey

SLA printers

Materials added:
Prusament Resin Tough Transparent Green, Prusament Resin Tough Transparent Red, Prusament Resin Tough Transparent Amber, Ameralabs TGM-7 LED

FFF printers

• Updated firmware version.

FFF printers

• Updated brim separation value.
• Added nozzle priming after M600 color change.
• Increased travel acceleration for Prusa MINI.
• Updated start g-code for Prusa MINI.
• Updated Z travel speed value.
• Disabled “Thick bridges” parameter for most print profiles.
• Updated support material settings.
• Added Filamentworld filament profiles.

SLA printers

• Added SLA material colors.

SLA printers

Materials added: Prusament Resin Bright Yellow, Prusament Resin Grass Green

FFF printers

• Added multiple profiles for BASF filaments.

SLA printers

Materials added: Prusament Resin Sandstone Model, Prusament Resin Terra Brown, Prusament Resin Brick Red

FFF printers

• Added multiple profiles for Filatech filaments.

SLA printers

• SL1/SL1S SPEED – Default pad wall slope changed to 45 degree.
• SL1S SPEED – Materials added: Prusa Vibrant Orange Tough, Prusa Deep Blue Transparent Tough, Prusa Green Dental Casting, PrimaCreator Tough Light Grey, PrimaCreator Tough Clear, PrimaCreator Tough White, PrimaCreator Flex Clear, PrimaCreator Water Washable Transparent, DruckWege Type D Dental Model, DruckWege Type D Standard White, DruckWege D Standard Pigmentfrei Clear

FFF printers

• Updated color change g-code. Added nozzle priming after color change sequence (M600). See https://github.com/prusa3d/PrusaSlicer/issues/6732.

SLA printers

• SL1/SL1S SPEED materials added: Prusament Resin Tough Prusa Orange, Prusament Resin Tough Rich Black, Prusament Resin Tough Anthracite Grey.

FFF printers

• Added multiple add:north filament profiles.
• Added multiple Extrudr filament profiles.

SLA printers

• Updated support head settings in “0.1 Fast” print profile for SL1S SPEED

SLA printers

• Added Prusa SL1S SPEED.

FFF printers

• Updated “Prusament PC Blend Carbon Fiber” profile for Prusa MINI.

FFF printers

• Added filament profile for “Prusament PC Blend Carbon Fiber”.

FFF printers

• Updated firmware version to 3.10.0 (MK3/MK2.5 family printers)
• Updated “0.35mm SPEED” print profile (MK2 family printers).
• Increased support material extrusion width in 0.05mm/0.07mm print profiles.
• Updated filament settings for Fillamentum ABS, Fillamentum ASA, Colorfabb HT, Kimya ABS (Prusa MINI)
• Print profile “0.15mm 100mms Linear Advance” was renamed to “0.15mm 100mms”
• Print profile “0.20mm 100mms Linear Advance” was renamed to “0.20mm 100mms”
• Added filament profiles for “Extrudr PLA NX1”, “Extrudr PLA NX2”

FFF printers

• Updated cost/density values in filament profiles.
• Decreased support interface speed in most profiles.
• Increased support extrusion width in 0.25mm nozzle print profiles.
• Increased number of perimeters in “0.10mm DETAIL” print profile.

FFF printers

• Updated firmware version (3.9.3).
• Updated end g-code in MMU2 printer profiles.

FFF printers

• Added 0.8mm nozzle profiles for MK3/MK2.5/MINI family printers (MMU2 currently only for “single mode”). Please make sure your firmware is up to date.
• Added “Prusament PVB” filament profile.
• Updated “SOLUBLE FULL” print profiles (slower speed for soluble supports).
• “Label objects” option is now enabled by default in all print profiles.
• Updated “Minimum shell thickness” values.

FFF printers

• Updated firmware version for MK2.5 family printers.

FFF printers

• Added “Full fan speed at layer” values to filament profiles.
• Updated “Infill anchor” values.
• Added spool weight values.
• Updated end g-code sections of all printer profiles to prevent crashes with specific sequential print scenarios.
• Increased support interface spacing for 0.6mm nozzle profiles.
• Global z-lift value changed to 0.4mm (MK2/MK2.5/MK3 family printers).
• Updated firmware version (MK2.5/MK3 family printers).

SLA printers

• Updated “Small pillar diameter percent” value.

FFF printers

• Added 0.8mm nozzle profiles for MK3/MK2.5/MINI family printers (MMU2 currently only for “single mode”). Please make sure your firmware is up to date.
• Added “Prusament PVB” filament profile.
• Updated “SOLUBLE FULL” print profiles (slower speed for soluble supports).
• Increased support interface spacing for 0.6mm nozzle profiles.
• Global z-lift value changed to 0.4mm (MK2/MK2.5/MK3 family printers).
• “Label objects” option is now enabled by default in all print profiles.
• Updated “Minimum shell thickness” values.
• Updated firmware version (MK3 family printers).

FFF printers

• MK3S and MINI printer profiles were renamed
• Updated end g-code in Prusa MINI printer profiles (slightly adjusted parking position).
  Filament profiles added: Overture PLA, Fiberthree F3 PA Pure Pro, Fiberthree F3 PA PA-CF Pro, Fiberthree F3 PA-GF Pro

SLA printers

Materials added: Prusa Jewelry Casting Yellow, Prusa Rich Black Tough, Prusa Deep Blue Transparent Tough

FFF printers

• Updated firmware version (MK2.5/MK2.5S/MK3/MK3S)

FFF printers

• Updated linear advance K values to match the fixes made in FW3.9.1 (MK3/MK2.5). For more information, see https://github.com/prusa3d/Prusa-Firmware/releases/tag/v3.9.1.
• Updated end g-code script in Prusa MINI printer profiles (the print head is now lifted higher and in the different order).
• Added “0.10mm DETAIL” print profile for MMU2S.
• Added “Kimya PETG Carbon” filament profile.
• Added “Kimya ABS Carbon” filament profile.
• Added “Kimya ABS Kevlar” filament profile.

SLA printers

• Materials added: Zortrax Black, Monocure 3D Black, Monocure 3D Blue, Monocure 3D White, FunToDo Industrial Blend Unpigmented, FunToDo Snow White, Asiga PlasGRAY, Harz Labs Basic Resin Red, Harz Labs Model Resin Cherry, Harz Labs Model Resin Black, Harz Labs Dental Cast Red

FFF printers

• Updated start and end g-code scripts for MK3 family printer profiles. Added conditional M907 command to reduce extruder motor current for some print profiles (ULTRA DETAIL, DETAIL, QUALITY and all 0.25mm nozzle profiles). This will reduce extruder motor temperature when printing with lower volumetric speeds.
• Added “Fillamentum FX256” filament profile.

SLA printers

• Materials added: BlueCast Castable Wax, BlueCast Model Dental Gray, Prusa White ABS like, 3DM-HR Red Wine, FunToDo Castable Blend Red, DruckWege Type D High Temp, Siraya Tech Blu Blue

FFF printers

• Updated end g-code for “MMU2/MMU2S Single” printer profiles. Heatbed is now turned off before filament unload to prevent unnecessary heating in case of failed filament unload.
• Added “Devil Design PLA” filament profile.
• Added “Devil Design PETG” filament profile.
• Added “Spectrum PLA” filament profile.
• Updated “ColorFabb XT-CF20” profile.

SLA printers

• Materials added: Siraya Tech Simple Clear, Siraya Tech Blu Clear V2, Siraya Tech Fast Grey, Siraya Tech Tenacious, Siraya Tech Easy, Siraya Tech Sculpt, Siraya Tech Fast Black, NextDent Model 2.0 Grey, NextDent Surgical Guide, NextDent Cast Purple, NextDent Crown Bridge, MakerJuice Labs Standard Red, 3DJake High Precision Grey, 3DJake High Precision Blue, Dragon Resin Metalshine Metal Grey, Dragon Resin Metalshine Dark Brass, Dragon Resin Metalshine Brass

FFF printers

• Updated firmware version for MK2.5/S and MK3/S

FFF printers

• Updated MMU1 specific retraction settings for Prusament PC Blend

FFF printers

• Added Prusament PC Blend filament profile (use configuration wizard to enable it).
• Added Generic HIPS filament profile (MMU2).
• Updated linear advance K values. There are now values for both LA 1.0 (older printer models and firmware versions) and LA 1.5 (FW 3.9.0 final and newer). Firmware version 3.9.0+ will detect and use LA 1.5 value automatically.
• Updated end G-code script for all printer models. Added M900 K0 command to reset linear advance K value after print.
• Updated advanced cooling settings for ABS filaments.

FFF printers

• Added Verbatim ABS filament profile.

SLA Printers

• fixed default SLA material
• Materials added: Prusa Vibrant Orange Tough

FFF printers

• Added renamed_from fields for PETG filaments to indicate that they were renamed from PET.
• Added Smartfil Wood filament profile.
• Updated auto cooling settings for ABS filaments.

FFF printers

• Top/bottom minimal thickness defined.
• Elephant foot compensation set to 0.2mm for all print profiles.
• Added Verbatim PETG filament profile.
• Added Fiberlogy PETG filament profile.

FFF printers

• Updated start g-code in MINI printer profiles (M92 command was removed).
• Updated extruder jerk value in MK2.5/MK2.5S/MK3/MK3S printer profiles (changed to 4.5).
• Increased support XY separation distance in MINI print profiles.
• Decreased extrusion multiplier and z-hop for Fillamentum Timberfill, ColorFabb woodFill and ColorFabb corkFill.
• Decreased maximum volumetric speed for Polymaker PC-Max
• Added “Smartfil Wood” filament profile.
• Added “Generic HIPS” filament profile.

SL1

• Materials added: 3DM-TOUGH Clear

• Added profiles for Prusa MINI

SLA Printers

Materials added: Prusa Clear ABS like, Prusa Yellow Jewelry Casting, Prusa Blue Flexible, Prusa Grey High Tenacity, Prusa Cyan Super Low Odor, Prusa Magenta Super Low Odor, Prusa Yellow Super Low Odor, Prusa Transparent Green Tough, Prusa Orange-Yellow Teeth Model, Resinworks 3D Green

Materials updated: Prusa Green Dental Casting

FFF Printers

• Updated firmware version to 3.8.1 (MK2.5/MK3)
• Updated acceleration values for 0.05mm and 0.07mm print profiles (0.4mm/0.25mm nozzle).
• Decreased z-hop for 0.25mm printer profile.
• First layer extrusion width for 0.25mm nozzle print profiles is now set to 0.3mm for all printers.
• Changed default color for PLA filaments.

FFF Printers

• added “Verbatim PLA” filament profile
• added “Fillamentum PLA” filament profile
• added “ColorFabb bronzeFill” filament profile
• added “ColorFabb steelFill” filament profile
• added “ColorFabb copperFill” filament profile
• removed “ColorFabb Brass Bronze” filament profile
• increased support extrusion width in “0.35mm FAST” print profile (MK2 family printers)

SLA PRINTERS

Materials added: BlueCast EcoGray 0.1, BlueCast X5 0.05, BlueCast 23LS 0.05, BlueCast Kera Master 0.1, 3DM-ABS 0.025, 3DM-Vulcan Gold 0.05/0.025, Asiga Denta Model 0.05, Amerlabs AMD 3 LED 0.05, Esun Bio-Photopolymer White 0.05/0.025, Esun Standard Resin Black 0.05/0.025, Prusa Clear Flexible 0.05

FFF PRINTERS

• Added 0.6mm nozzle profiles for printing with soluble supports (MMU2/MMU2S).

FFF PRINTERS

• Added filament specific retract settings for PET and similar copolymers, and for FLEX
• Added “Generic FLEX” filament profile (lower print speed, retraction disabled).
• Added MMU2/MMU2S profiles for 0.6mm nozzle.
• Added printer model and nozzle diameter check (start g-code).
• Single extruder printers now have no extruder color assigned, objects and toolpaths will be colored with the color of the active filament.
• Updated end g-code for the “MMU2 Single” printer profiles to lift the print head at the end of print.
• Wipe tower bridging distance was made smaller for “soluble” print profiles.

SL1

• Updated bed shape settings.
• Updated initial exposure time for materials: Prusa Orange Tough, Prusa Grey Tough, Prusa Azure Blue Tough, Prusa Maroon Tough, Prusa Beige Tough, Prusa Pink Tough, Prusa White Tough, Prusa Black Tough, Prusa, Transparent Red Tough, Prusa Transparent Tough

FFF PRINTERS

• Prusament ASA profile added

FFF printers

• Updated FW version for MK2.5/MK2.5S/MK3/MK3S (3.7.2).

SL1

• Material profiles added: Prusa Green Casting 0.025, Prusa Green Casting 0.1, BlueCast EcoGray 0.025, BlueCast Phrozen Wax 0.025, BlueCast Keramaster Dental 0.025, BlueCast X10 0.025.
• Material profiles updated: Prusa Green Casting 0.05, BlueCast EcoGray 0.05, BlueCast Phrozen Wax 0.05, BlueCast Keramaster Dental 0.05, BlueCast X10 0.05.

FFF printers

• Updated filament types in advanced filament settings
• Updated output filename format for 0.25mm and 0.6mm nozzle print profiles (nozzle diameter added).

SL1

• Updated support settings for “0.1 Fast” print profile.
• Material profiles added: Prusa Transparent Tough 0.025, Prusa Transparent Tough 0.05, Prusa Transparent Tough 0.1, Prusa Beige Tough 0.1, Prusa Pink Tough 0.1, Prusa Azure Blue Tough 0.1, Prusa Maroon Tough 0.1, Prusa White Tough 0.1, Prusa Black Tough 0.1
• Material profiles updated: 3DM-ABS 0.05, Prusa Skin Tough (renamed to “Beige”), Prusa Orange Tough 0.1

FFF printers

• Updated output filename format. Output filename now contains estimated print time
• extruder clearance values increased (sequential printing)

SL1

• Material profiles added: Prusa Grey Tough 0.025, Prusa Maroon Tough 0.025, Prusa Azure Blue Tough 0.025, Prusa Skin Tough 0.025, Prusa Pink Tough 0.025, Prusa White Tough 0.025, 3DM-BLACK 0.05, Photocentric Hard Grey 0.05
• Material profiles updated: Prusa Skin Tough 0.05, Prusa Pink Tough 0.05, Prusa Maroon Tough 0.05, Prusa White Tough 0.05, Monocure 3D Grey Rapid Resin 0.05

• Original Prusa SL1 profiles added

• Enabled remaining time support for MK2/S

• Added new print profile “0.30mm DRAFT” (MK3/MK3S)

• Updated print settings for 0.6mm nozzle (MK3/MK3S):
  • Added new print settings “0.30mm QUALITY”, “0.35mm SPEED” and “0.40mm DRAFT”.
  • Removed “0.10mm DETAIL 0.6 nozzle MK3” print setting.
  • Updated layer height limits in printer settings.
  • Default infill changed to 15% gyroid.
  • Added “Prusa PET 0.6 nozzle” and “Prusament PETG 0.6 nozzle” material profiles with higher volumetric speed limits (visible only for 0.6mm nozzle printer variants).
• Updated print settings for 0.25mm nozzle (MK3/MK3S):
  • Added new print setting “0.07mm ULTRADETAIL”.
  • Reduced speeds for 0.1mm and 0.15mm settings.
  • Print setting “0.15mm OPTIMAL” renamed to “0.15mm QUALITY”.
  • Increased first layer extrusion width for better adhesion on powder coated PEI sheets.
  • Optimized intro line.
• Updated “ColorFabb Brass Bronze” filament profile. Added steelFill and CopperFill to filament notes.

• New MK2.5S and MK3S FW versions

• Added printer profiles for MK3S
• Added printer profiles for MK2.5S
• Added printer profiles for MMU2S
• Renamed MK2 printer profiles (MK2S)
• Added new print settings “0.07mm ULTRADETAIL” (MK3/MK3S)
• Added new print settings “0.15mm QUALITY” and “0.15mm SPEED” (MK3/MK3S)
• Added new print settings “0.20mm QUALITY” and “0.20mm SPEED” (MK3/MK3S)
• Removed print settings “0.15mm OPTIMAL” and “0.20mm FAST” (MK3/MK3S)
• Changed default infill to 15% gyroid for “0.05mm ULTRADETAIL” and “0.1mm DETAIL” print settings
• Added filament profile for PrimaSelect PVA+ (MMU2/MMU2S).
• “SOLUBLE” print settings – reduced maximal bridging distance on sparse infill sections of the wipe tower (10mm -> 8mm).
• Updated MK2.5 MMU2 “SOLUBLE” print profiles. The soluble filament is now assigned to extruder 5 by default (changed from 4).
• Updated tool change parameters in filament settings (MMU2/MMU2S)

• New firmware versions (3.5.1) for MK2.5 and MK3
• Fixed acceleration value for infill (changed from 1250mm/s2 to 2000mm/s2) in “0.2mm NORMAL” print settings (MK2/MK2.5 and MMU variants)
• Assigned correct default filament profile to “Original Prusa i3 MK3 MMU2 Single” printer profile. Incorrect default filament caused spontaneous switch to Colorfabb Brass Bronze.
• Enabled variable layer height feature for all MMU1 printer profiles.
• Enabled variable layer height feature for MK2/MK2.5 0.25mm nozzle printer variants.
• Layer height limits (variable layer height) for 0.25mm nozzle printer variants changed from 0.05-0.1mm to 0.05-0.15mm.
• Removed redundant retraction after initial purge line in MMU1 printer profiles.
• Filament “Colorfabb XT-CF20” is now available only for printers with nozzle diameter greater than 0.35mm.
• Various small changes in the Notes section of filament settings.